Documentation
Getting Started
Installation and Access
Network Configuration
Verification and Maintenance
Troubleshooting Overview: Start From the Symptom
This page finds the answer by symptom, so you do not have to read the chapters in order.
Read the table first, then go to the matching page.
Symptom overview
| Symptom | Most likely cause | Go to |
|---|---|---|
The browser cannot open 192.168.10.1 | The address is missing https:// | Login and internet access |
| It says "Your connection is not private" | The device uses a self-signed certificate; this is normal | Login and internet access |
root / admin does not sign you in | The password has already been changed | Login and internet access |
| The gateway is configured but there is no internet | The WAN protocol does not match the access mode | Login and internet access |
| After changing the LAN port IP the admin page is unreachable | The computer is still on the old subnet | Login and internet access |
| The gateway has internet but the platform shows no device | The account name in the server address does not match | Networking and reachability |
| All devices are online but the two sides cannot ping each other | The subnet proxy is not configured, or subnets repeat | Networking and reachability |
| Ping works but web pages do not open | Access control has only one direction selected | Networking and reachability |
| Bypass router mode is configured but the remote site is still unreachable | The endpoint gateway does not point at the gateway's LAN port | Networking and reachability |
| It drops occasionally, working on and off | The bypass router has DHCP on and competes with the upstream | Networking and reachability |
| Surveillance is laggy and slow | The store's uplink is insufficient, or the link is not optimized | Slow and laggy |
| The gateway shows no lights at all | A power supply or power adapter problem | Getting technical support |
| The gateway login password is forgotten | Reconfigure only after a factory reset | Device maintenance |
The 30-second version: check the lights first
If the power light is off, check the power supply and the power adapter first.
If a network port light is off, check that the cable is seated firmly first.
Next, check internet access
On a computer connected below the gateway, open any web page.
If it does not open, go back to the page for that access mode and check each item.
Finally, check whether it is online on the platform
Sign in to the platform and check whether the member device status is 在线(Online).
If it is not online, go to Networking and reachability.
- Restart the gateway once.
- Confirm that the computer below the gateway has internet access.
- Screenshot the platform device list and statuses.
This saves a round of back-and-forth.
Next → Admin page unreachable, no internet after configuration
Was this page helpful?A one-line note helps us make these steps more accurate.