Documentation
Getting Started
Installation and Access
Network Configuration
Verification and Maintenance
Getting Technical Support
This page explains when to contact the device supplier and what to prepare before you do.
First decide: fix it yourself, or contact the supplier
| Situation | Handled by | Where to go |
|---|---|---|
| Configuration mistake: address, subnet, subnet proxy, access control | Fix it yourself following the docs | Troubleshooting overview |
| Forgotten password, or a factory reset is needed | Ask the device supplier first | Device maintenance |
| The device will not power on, indicator lights are off | Device supplier | This page |
| Hardware damage, loose ports | Device supplier | This page |
| Platform account problems, cannot sign in to the platform | Device supplier | This page |
| Firmware upgrade failure | Device supplier | This page |
| Followed the docs several times and it still does not work | Device supplier | This page |
Prepare these five items before reporting a fault
State them once, clearly, and save a round of back-and-forth.
| Item | Description |
|---|---|
| Project name and site owner | So the case can be matched up |
| Device model and serial number | On the device label |
| Purchase date and channel | For warranty lookup |
| Symptom and when it started | Describe the symptom only, not your guesses |
| Troubleshooting already done | Follow the overview table, for example "confirmed the gateway has internet access" |
Contact details
Contact details: to be provided (filled in by the device supplier).
Warranty period and repair process: to be provided (filled in by the device supplier).
About this site
This site does not provide direct contact details. Technical support is provided by the device supplier.
Contact the supplier before a factory reset
A factory reset erases the entire configuration. Confirm that you have a configuration backup before you start.
Next → Troubleshooting overview
Was this page helpful?A one-line note helps us make these steps more accurate.