Skip to main content

Admin Page Unreachable, No Internet After Configuration

Two of the most common problems: you cannot get into the admin page, or there is no internet after configuration.

Work through the items one by one; the item you cannot tick is the problem.

A. The browser cannot open 192.168.10.1​

  • The address includes https://; the full address is https://192.168.10.1
  • The computer IP is on the 192.168.10.x subnet, mask 255.255.255.0
  • The cable is plugged into a gateway LAN port, and that port light is on
  • The computer firewall and antivirus are not blocking it
  • You have already clicked through the certificate warning page

The browser certificate warning page; look for "Advanced" and "Proceed"

The certificate warning does not mean an infection.

The device uses a self-signed certificate; click Advanced → Proceed.

B. No internet after configuration​

Access ModeCheck firstCommon mistake
桥接模式(Bridge Mode)The broadband account and password; whether the optical modem really is bridgedThe optical modem is still in router mode
二级路由模式(Secondary Router Mode)Whether the LAN port is on the same subnet as the upstreamThe optical modem is 192.168.1.1, and the gateway LAN port also uses 192.168.1.1
旁路由模式(Bypass Router Mode)Whether the LAN port IP conflicts; the gateway field; whether DHCP is offDHCP left on, competing with the upstream router
All threeWhether the WAN protocol matches the access modeBridge Mode chosen but the DHCP client protocol selected
A wrong LAN port IP locks you out of the admin page

Recover in this order:

  1. Try the old address first.
  2. Move the computer to the old subnet, then the new one, and try each.
  3. Only then do a factory reset.
What you should see when done
  • The login page at https://192.168.10.1 opens.
  • Computers below the gateway can open external web pages.

It looks broken, but it is a configuration mistake​

SymptomWhat it actually is
The login page does not openhttps:// is missing
A certificate warningA self-signed certificate; this is normal
Secondary Router Mode connects but web pages do not openThe LAN port is on the same subnet as the upstream
The bypass router drops out randomlyDHCP is still on
The platform shows online but the sites cannot reach each otherThe subnet proxy is not configured

Next → The platform does not show the device, or sites cannot reach each other