Documents
Rotate the Output Signal
Note: output rotation only needs to be set on the main card; other sub-cards do not need it.
① Open the Device Configuration Tool, click Search to find the devices, and click the gear button after the IP with an M. (An IP followed by M is the main card.)

① In the settings box that opens, select the “Modify Information” tab, choose the rotation angle under rotation settings and click Save.

③ After saving, click Restart All to restart the device.

③ After the device restarts, log in to the software again and turn on the rotation function in the software settings so it works normally.
Did this page help you?One line of feedback helps us keep the steps accurate.