Documents
Product Safety Precautions
To protect personal safety and prevent damage to the product, you must strictly observe the following basic safety precautions and warnings before using this product.
1. Basic operating precautions
-
Before using this product, read all safety notices and operating instructions completely and carefully, and become familiar with every procedure before operating the device.
-
The product must be reliably grounded. In the event of a fault, the grounding structure conducts fault current to earth through the minimum ground resistance, effectively reducing the risk of electric shock. The power cord of this product provides a dedicated safety ground; when in use, insert the power plug firmly into a compliant power socket, and the socket must be installed and grounded in strict accordance with local electrical installation codes so that the grounding remains effective.
-
When children are near the product work area, the operator must supervise them at all times and prevent them from touching or operating the device, minimizing the risk of accidents and personal injury.
-
Do not use this product in high-humidity environments, to prevent moisture-related faults and leakage hazards.
-
Install and place this product in a well-ventilated area to meet the device heat dissipation requirement and avoid heat build-up damaging the device.
-
During use, keep the device away from open flames and high-temperature heat sources to prevent fire, equipment burnout and other accidents.
-
Maintain the device properly in daily use: never allow debris or liquids to enter the chassis through gaps, which could cause short circuits, component damage and other faults.
-
Do not repeatedly plug and unplug device ports; handle connectors properly to avoid loosening, damage or poor contact that would affect normal operation.
-
Never operate the device beyond its rated power; run modules strictly within their rated parameters to prevent overload damage and safety hazards.
-
Device power must strictly match the rated voltage and current marked in the product parameters; never connect a power supply of a different specification.
2. Device fault repair rules
- In any of the following fault conditions, do not open the chassis for repair yourself; the device must be inspected and repaired by a qualified electrician or service technician:
A. The power cord or power plug is damaged, aged or broken;
B. Debris or liquid has entered the chassis;
C. The device has been exposed to rain or moisture and water has entered it;
D. The device has been dropped or struck, with chassis damage or severe deformation.
- If an abnormal condition or fault not covered by this manual occurs, the user must not disassemble or repair the device. Contact the manufacturer promptly and we will assign a qualified service technician to inspect and handle it.
3. Important safety warnings
Improper connection of the device grounding directly causes electric shock accidents. If the user cannot confirm that the device grounding is correct and reliable, do not judge or modify it by yourself; have a qualified electrician test it professionally.
Do not modify the product power plug without authorization. If the power plug does not match the socket on site, do not force it into use and do not modify the plug yourself; have a qualified electrician install a compatible, compliant power socket to ensure electrical safety.
Reminder
Reminder: If the chassis is opened without the manufacturer's permission, the manufacturer accepts no responsibility for any safety issue arising from it, and the product will no longer be covered by warranty. Please take note. Please confirm that you have read the precautions above, to avoid unnecessary misunderstanding. Thank you.
Did this page help you?One line of feedback helps us keep the steps accurate.